dry power transformer
Shanghai Beibian designs dry-type transformer solutions for projects that need voltage conversion or electrical isolation without a liquid dielectric. The right winding design, insulation system, cooling method and enclosure depend on the load and installation conditions.
Explore six application-specific product pages below, then share your electrical schedule and site requirements for a project-specific proposal.
Dry Power Transformer
What a dry power transformer does
A dry-type transformer transfers alternating-current power through magnetic induction while using solid or gaseous insulation rather than an oil-filled winding tank. It may step voltage up or down, provide isolation, or interface with power conversion equipment. The insulation and cooling arrangement must be selected for the actual electrical duty and site conditions.
Shanghai Beibian supplies application-specific transformer designs. VPI and cast-resin winding systems are options across the broader range; they are not interchangeable specifications for every model.
Select around your electrical and site requirements
Start with the electrical schedule, then confirm the installation environment. These inputs determine whether a proposed transformer fits the system and what needs to be verified in the final design.
- Electrical duty: rated power, primary and secondary voltage, frequency, phases, taps, impedance and load profile.
- System interface: isolation requirement, rectifier or inverter arrangement, harmonic content and any phase-shift requirement.
- Installation: indoor, containerized, marine or exposed location; space, ventilation, ambient temperature and enclosure needs.
- Project documents: applicable standard, drawings, terminal arrangement and inspection or test requirements.
Dry-type transformer solutions by application
Choose the closest application to review its dedicated product page. Final ratings, dimensions, protection and cooling details are established against the project specification.

Dry-Type Isolation Transformer for Shore Power
Isolation for vessel-to-shore power systems, with design matched to the incoming supply and onboard distribution.
- ApplicationShore power
- Design focusVoltage and frequency interface

Containerized Dry-Type Transformer for Industrial Power Supply
A dry-type transformer option for industrial power systems integrated into a containerized installation.
- ApplicationContainerized industrial supply
- Design focusSite layout and auxiliary circuits

AFWF Dry-Type Rectifier Transformer for Medium-Voltage Drives
Rectifier transformer design for medium-voltage drive systems using an air-forced, water-forced cooling arrangement.
- ApplicationMedium-voltage drives
- CoolingAFWF

Dry-Type Transformer for Marine & Offshore Applications
A dry-type solution intended for marine and offshore power systems where enclosure and environmental conditions need review.
- ApplicationMarine and offshore
- Design focusEnvironmental protection

Dry-Type Transformer for Power Testing Applications
Transformer design for power testing installations, specified against the test supply and duty cycle.
- ApplicationPower testing
- Design focusTest duty and connections

Dry-Type Transformer for Renewable Energy Systems
Dry-type transformer design for renewable energy installations, coordinated with the converter and site electrical system.
- ApplicationRenewable energy
- Design focusConverter interface
Insulation and cooling are project choices
Dry-type construction can use different winding protection methods, including vacuum pressure impregnation (VPI) or cast resin, depending on the selected product. Cooling can rely on natural air, forced air or a designed air-to-water arrangement. For example, the AFWF rectifier transformer is presented as a water-cooled option for drive applications.
For procurement, specify the required environment and operating duty instead of assuming a single winding or cooling construction across all six products. Confirm ventilation paths, water interfaces where applicable, service access and the required enclosure with the engineering drawing.
Applications covered by this range
Shore and marine power
Coordinate the shore interface, vessel distribution and exposure conditions for isolation and marine applications.
Industrial and drive systems
Define the container layout, auxiliary supply, rectifier duty and cooling arrangement for industrial installations.
Testing and renewables
Match test cycles or converter operating profiles to the transformer electrical and thermal design.
Engineering review before manufacture
Send a single-line diagram, load information and installation constraints. The engineering review should resolve the voltage ratio, winding arrangement, impedance target, insulation and cooling method, enclosure, terminals and monitoring needs before the final drawing is approved.
Agree the inspection and factory test scope in the purchase specification. Record the required documents and acceptance criteria for the exact unit; do not infer a test result or certification from a product family description.
What to include in a quote request
For a useful proposal, include rated power, input and output voltage, frequency, phase count, application, load or converter details, cooling preference, installation location, enclosure requirement, quantity and the target delivery location. Attach your single-line diagram or data sheet if available.
Use the inquiry form below and identify the product application that best matches your project.
Request a Dry Power Transformer Quote
Share your electrical schedule and site conditions so the team can review a suitable configuration.
- Phone: 8615267082061
- Email: [email protected]
- WhatsApp: 8615267082061
- Address: 333 Minta Road, SongjiangDistrict, Shanghai
BBELC