...

Search the whole station

construction power transformer

A power transformer begins with a magnetic core and insulated windings, but its construction also determines how heat escapes, how conductors withstand fault forces, and how the unit connects to the electrical system.

Shanghai Beibian Technology Co., Ltd. designs and manufactures dry-type and special transformers for industrial power conversion. Explore the construction choices below, then share your electrical and installation requirements for a project-specific design.

Inside a Power Transformer

The active assembly combines a laminated electrical-steel core with primary and secondary windings. Alternating current in the primary produces changing magnetic flux in the core; that flux induces voltage in the secondary. The turns ratio sets the nominal voltage relationship, while insulation keeps turns, windings, and grounded metal separated.

PartConstruction roleDesign consequence
Laminated coreGuides magnetic flux through stacked, insulated steel sheets.Steel grade, joint design, and clamping influence no-load loss, excitation current, and sound.
WindingsCarry the input and output currents in insulated conductor turns.Conductor area, geometry, and spacing affect load loss, impedance, temperature rise, and fault-force resistance.
InsulationSeparates turns, phases, windings, and grounded structure.Material and clearances must suit operating voltage, surges, thermal class, and the installation environment.
Supports and connectionsHold the active assembly and bring conductors to terminals.Bracing, leads, and terminal layout influence transport integrity, short-circuit strength, and site installation.

Core-form and shell-form describe how the steel and coils are arranged. The choice changes the magnetic path and winding support; it is an engineering decision tied to rating and duty, rather than a performance label on its own.

Insulation and Cooling Shape the Construction

Dry-type construction places insulated windings in an air-cooled assembly. Impregnation binds and protects the winding while leaving a visible coil structure; cast resin encloses a winding in a molded insulation body. The selected system changes moisture resistance, heat paths, repair access, and physical dimensions.

Liquid-filled construction places the core and windings in a sealed or conservator-equipped tank. The liquid provides dielectric insulation and carries heat toward the tank surface or external cooling equipment. Tank integrity, bushings, liquid management, and site containment become part of the equipment design.

For a dry-type unit, the enclosure cannot be selected independently of cooling. Air passages through the windings and around the core need an unobstructed path; fans, a protected enclosure, or a closed air-to-water circuit change the cooling arrangement. Shanghai Beibian offers dry-type designs with different insulation and cooling constructions, including impregnated windings and enclosed AFWF systems for specified duties.

Dry-Type Transformer Construction Example

The specified product illustrates an impregnated, multi-winding dry-type assembly. Its reinforced structure supports vehicle transport and outdoor industrial deployment; final terminals, cooling, and enclosure details follow the project specification.

How Shanghai Beibian Builds Dry-Type Transformers

Shanghai Beibian starts with contract review and electrical design, then plans materials, production, and inspection around the specified transformer. Incoming checks cover conductor, insulation materials, electrical steel, and structural parts before fabrication begins.

  1. Core preparation: electrical-steel sheets are inspected, slit, cut, stacked, and checked as a core assembly.
  2. Coil and insulation work: conductors are insulated and wound; coil welding and semi-finished coil inspection precede impregnation or another specified insulation process.
  3. Active-part assembly: the core, coils, insulation pieces, leads, and structural parts are assembled and checked before final integration.
  4. Finished-unit release: the assembled transformer undergoes electrical tests and outgoing quality inspection before packing.

These stages keep a winding or core defect from being discovered only after final assembly. Construction details such as continuous high-voltage coils, added insulation distance, cooling ducts, or transport reinforcement are used where the electrical rating and service conditions call for them.

Factory Tests Verify the Built Design

A completed transformer should be checked against the approved electrical design and the agreed test plan. Shanghai Beibian’s production records describe inspections at incoming material, coil, insulation, core, assembly, and finished-unit stages.

Finished-unit tests can include insulation resistance, voltage ratio and phase relationship, winding resistance, impedance, no-load and load losses, applied and induced withstand voltage, and partial-discharge measurement where applicable. Ratio and phase checks confirm the connections; resistance and loss tests expose deviations in conductors or core assembly; dielectric tests assess the insulation system.

The purchase specification should identify the applicable standard edition, acceptance values, witness points, and required report package. A routine test report documents the delivered unit’s measured results; design or type-test evidence has a different scope and should be requested when the project requires it.

Define the Construction Around Your Duty

Send the single-line diagram, primary and secondary voltages, capacity, frequency, vector group, impedance target, and load profile. Rectifier or drive loads also need the pulse arrangement, harmonic duty, and separate winding requirements because these change conductor layout, phase relationships, and heat generation.

Site data should include ambient temperature, altitude, available ventilation or cooling water, moisture and dust exposure, enclosure limits, transport constraints, terminal positions, and maintenance access. These conditions determine whether the proposed insulation, cooling, bracing, and enclosure can operate together in the available space.

Shanghai Beibian can use those inputs to develop the electrical and mechanical arrangement and define the drawings and factory tests for review before production.

Send your design requirements

Discuss Your Transformer Design

Send the electrical duty and site conditions. Our team can review the winding, insulation, cooling, and enclosure arrangement for your project.

  • Phone: 8615267082061
  • Email: [email protected]
  • WhatsApp: 8615267082061
  • Address: 333 Minta Road, Songjiang District, Shanghai

Include a single-line diagram or the primary and secondary voltages, capacity, load duty, frequency, installation conditions, and required standards.